The network and devices configuration can be saved as file in the PC and later reloaded. From PC it is possible to check the operating of each single device connected to the network and edit its parameters output level, mute, equalization, delay, etc.
For the RDNET network operating, it is necessary to install the appropriate Software on PC, on Microsoft Windows® environment. Each device is assigned a unique address during the power on procedure of network. The addressing of the various devices is handled automatically by RDNet Control 2 2 Output Master Unit interface.
Up to 32 devices can be connected to each subnet (2 subnets x 32 = total 64 devices). The RDNet Control 2 2 Output Master Unit unit can manage up to 2 subnets. The RDNet system was purposely developed to create a data network for monitoring and command of more systems.
The RDNet Control 2 is a 2 output hardware interface to connect RCF RDNet compatible devices (TTL55-A, TT元3-A II, TT元1-A II, etc.) to a Personal Computer (PC) by means of an USB connection. The amplifier is housed in a separate chamber from the transducers to offer the best efficiency and reliability.Description RDNet Control 2 2 Output Master Unit All the parts are assembled on metal inserts with metric screws. The internal structure is heavily braced to survive long-term use and transportation.
The TT 1-A II's Baltic birch plywood cabinet features built-in carry handles and a 35mm pole socket to grant ease of installation. Standard powerCON input and output jacks are employed for straightforward integration with typical power configurations. Two etherCON ports are available for connecting to RCF's RDNet protocol, which allows the speaker to be controlled by the RDNet software remotely. The rear panel offers an XLR input and XLR thru for daisy chaining to additional speakers. The onboard controls include gain reduction, RDNet setup/bypass, time delay, and presets for linear, close and far listening, and high-pass (for use with subwoofers).
Built-in DSP provides thermal and RMS protections plus a soft limiter. Onboard FirPHASE filters deliver optimum imaging and phase response with minimal latency. The TT 1-A II utilizes a 1600W Class-D amplifier to power the 10" neodymium woofer and 1.4" compression driver, yielding a frequency response of 55 Hz to 20 kHz. The loudspeaker can be used as a stand-alone FOH system, a satellite (with subwoofer) or a stage monitor. Audio engineers and professional audio rental houses looking for a high-output and compact powered speaker with RDNet capabilities and professional-quality sound will be impressed with the black RCF TT 1-A II, a 10" 2-way 1600W active loudspeaker designed to offer accurate phase and wide frequency response for DJs, audio engineers, and rigging technicians in clubs, houses of worship, concert venues, and live stage applications.